Tips on Changing a Tire Safely and Effectively

Changing a tire is a basic car maintenance skill that every driver should know. It can be a lifesaver in case of emergencies. Here is a detailed explanation of the steps involved in changing a tire:

1. Loosen the lug nuts:

Using a lug wrench, loosen the lug nuts on the flat tire before lifting the car off the ground.

2. Lift the car with a jack:

Place the jack under the car at the specified jacking point and lift the car until the flat tire is off the ground.

3. Remove the lug nuts completely:

Once the car is lifted, remove the lug nuts and set them aside in a safe place.

4. Remove the flat tire:

Take off the flat tire from the hub by pulling it towards you and set it aside.

5. Mount the spare tire:

Line up the spare tire's lug nut posts with the holes in the hub and push the spare tire onto the hub until it's flush with the hub.

6. Tighten the lug nuts:

Hand-tighten the lug nuts on the spare tire, then lower the car back to the ground and tighten the lug nuts with the lug wrench in a crisscross pattern.

It is important to always consult your vehicle's owner's manual for specific instructions on changing a tire as procedures can vary by make and model.