What do you need to do when applying a peel and stick waterproof membrane foundation?
To apply a peel and stick waterproof membrane foundation, clean the foundation surface, cut the membrane into lengths, peel off the backing, stick the membrane onto the surface, ensuring no air bubbles remain, and apply pressure to ensure proper adhesion. Overlap the edges to prevent leakage.
Steps to Apply a Peel and Stick Waterproof Membrane Foundation
1. Prepare the Foundation
Before applying the peel and stick waterproof membrane foundation, it is crucial to prepare the foundation surface properly. The surface should be clean, dry, and free from any protrusions or debris that may affect the adhesion of the membrane.
2. Cut the Membrane
Next, cut the membrane into lengths that are suitable for the area you are working on. Ensure that the membrane is cut to the appropriate size to cover the foundation surface effectively.
3. Peel Off the Backing
Carefully peel off the backing from the membrane to expose the adhesive side. Take care not to damage the membrane during this process.
4. Stick the Membrane
Stick the membrane onto the foundation surface, starting from one end and working your way across. Make sure to press the membrane firmly onto the surface to avoid any air bubbles from forming underneath.
5. Apply Pressure
Apply pressure to the membrane using a roller or a trowel to ensure proper adhesion to the foundation. This step will help the membrane bond securely to the surface and create a watertight seal.
6. Overlap the Edges
Overlap the edges of the membrane strips to create a continuous barrier that prevents any water leakage. Ensure that the edges are securely bonded to each other to maintain the integrity of the waterproofing system.
By following these steps, you can successfully apply a peel and stick waterproof membrane foundation to protect your structure from water damage and leaks.